[Previous] [Next] [Index]
[Thread]
Digest Access Authentication Draft
Comments are requested on the attached draft for Digest Authentication
for use with HTTP/1.1. The desire to keep this draft on the same time
schedule as HTTP/1.1 and the hope that it can be incorporated as part
of HTTP/1.1 requires responses (to this list) within a week.
The digest authentication scheme described in this document suffers
from many known limitations. It is intended as a replacement for
basic authentication and nothing more. Basic authentication, which
is currently in wide use, sends passwords in clear text. This is
serious problem which needs to be rectified as quickly as possible.
Rectifying quickly and painlessly is the prime objective of digest
authentication.
Users and implementors should be aware that this protocol is not as
secure as kerberos, and not as secure as any client-side private-key
scheme. Nertheless it is better than nothing, better than what is
commonly used with telnet and ftp and better than Basic authentication.
Suggestions for changes and improvements are welcomed but will be
judged in light of the following factors.
PLEASE CONSIDER THESE FACTORS BEFORE SUGGESTING CHANGES:
1. The objective of digest authentication is NOT to produce the
strongest possible authentication scheme or even a particularly
strong one. The objective is to produce the simplest and easiest
to implement scheme which does not transmit user passwords in clear
text and which can quickly replace Basic authentication.
2. Commercial implementations of the non-optional parts of this
scheme have been in existence and widely deployed for some time.
Sigficant changes at this point will break many browsers and servers.
Is your suggested change of sufficient importance to outweigh this
fact?
John Franks Dept of Math. Northwestern University
john@math.nwu.edu
-------------------------------------------------------------------------
HTTP Working Group Jeffery L. Hostetler
INTERNET-DRAFT John Franks
<draft-ietf-http-digest-aa-04.txt> Philip Hallam-Baker
Paul Leach
Ari Luotonen
Eric W. Sink
Lawrence C. Stewart
Expires SIX MONTHS FROM---> ????, 1996
A Proposed Extension to HTTP : Digest Access Authentication
Status of this Memo
This document is an Internet-Draft. Internet-Drafts are working
documents of the Internet Engineering Task Force (IETF), its areas,
and its working groups. Note that other groups may also distribute
working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
To learn the current status of any Internet-Draft, please check the
"1id-abstracts.txt" listing contained in the Internet-Drafts Shadow
Directories on ds.internic.net (US East Coast), nic.nordu.net
(Europe), ftp.isi.edu (US West Coast), or munnari.oz.au (Pacific
Rim).
Distribution of this document is unlimited. Please send comments to
the proposed HTTP working group at <http-wg@cuckoo.hpl.hp.com>.
Discussions of the working group are archived at
<URL:http://www.ics.uci.edu/pub/ietf/http/>. General discussions
about HTTP and the applications which use HTTP should take place on
the <www-talk@www10.w3.org> mailing list.
Abstract
The protocol referred to as "HTTP/1.0" includes specification for a
Basic Access Authentication scheme. This scheme is not considered to
be a secure method of user authentication, as the user name and
password are passed over the network in an unencrypted form. A
specification for a new authentication scheme is needed for future
versions of the HTTP protocol. This document provides specification
for such a scheme, referred to as "Digest Access Authentication".
The encryption method used by default is the RSA Data Security, Inc.
MD5 Message-Digest Algorithm [3].
Table of Contents
STATUS OF THIS MEMO....................................................1
ABSTRACT...............................................................1
TABLE OF CONTENTS......................................................2
INTRODUCTION...........................................................2
1.1 PURPOSE .........................................................
1.2 OVERALL OPERATION ...............................................
1.3 REPRESENTATION OF DIGEST VALUES .................................
1.4 LIMITATIONS .....................................................
2. DIGEST ACCESS AUTHENTICATION SCHEME.................................
2.1 SPECIFICATION OF DIGEST HEADERS ..................................
2.1.1 THE WWW-AUTHENTICATE RESPONSE HEADER ..........................
2.1.2 THE AUTHORIZATION REQUEST HEADER ..............................
2.1.3 THE AUTHENTICATION-INFO HEADER ................................
2.2 DIGEST OPERATION .................................................
2.3 SECURITY PROTOCOL NEGOTIATION ....................................
2.4 EXAMPLE ..........................................................
2.5 PROXY-AUTHENTICATION AND PROXY-AUTHORIZATION .....................
3. SECURITY CONSIDERATIONS............................................
3.1 COMPARISON WITH BASIC AUTHENTICATION ............................
3.2 REPLAY ATTACKS ..................................................
3.3 MAN IN THE MIDDLE ...............................................
3.4 SPOOFING BY COUNTERFEIT SERVERS .................................
3.5 STORING PASSWORDS ...............................................
3.6 SUMMARY .........................................................
4. ACKNOWLEDGMENTS...................................................
5. REFERENCES.........................................................
6. AUTHORS ADDRESSES..................................................
Introduction
1.1 Purpose
The protocol referred to as "HTTP/1.0" includes specification for a
Basic Access Authentication scheme[1]. This scheme is not considered
to be a secure method of user authentication, as the user name and
password are passed over the network in an unencrypted form. A
specification for a new authentication scheme is needed for future
versions of the HTTP protocol. This document provides specification
for such a scheme, referred to as "Digest Access Authentication".
The Digest Access Authentication scheme is not intended to be a
complete answer to the need for security in the World Wide Web. This
scheme provides no encryption of object content. The intent is
simply to facilitate secure access authentication.
It is proposed that this access authentication scheme be included in
the proposed HTTP/1.1 specification.
1.2 Overall Operation
Like Basic Access Authentication, the Digest scheme is based on a
simple challenge-response paradigm. The Digest scheme challenges
using a nonce value. A valid response contains a checksum (by
default the MD5 checksum) of the username, the password, the given
nonce value, and the requested URI. In this way, the password is
never sent in the clear. Just as with the Basic scheme, the username
and password must be prearranged in some fashion which is not
addressed by this document.
1.3 Representation of digest values
An optional header allows the server to specify the algorithm used to
create the checksum or digest. By default the MD5 algorithm is used
and that is the only algorithm described in this document.
For the purposes of this document, an MD5 digest of 128 bits is
represented as 32 ASCII printable characters. The bits in the 128
bit digest are converted from most significant to least significant
bit, four bits at a time to their ASCII presentation as follows.
Each four bits is represented by its familiar hexadecimal notation
from the characters 0123456789abcdef. That is binary 0000 gets
represented by the character '0', 0001, by '1', and so on up to the
representation of 1111 as 'f'.
1.4 Limitations
The digest authentication scheme described in this document suffers
from many known limitations. It is intended as a replacement for
basic authentication and nothing more. It is a password-based system
and (on the server side) suffers from all the same problems of any
password system. In particular no provision is made in this protocol
for the initial secure arrangement between user and server
establishing the user's password.
Users and implementors should be aware that this protocol is not as
secure as kerberos, and not as secure as any client-side private-key
scheme. Nertheless it is better than nothing, better than what is
commonly used with telnet and ftp and better than Basic
authentication.
Some keyword-value pairs occurring in headers described below are
required to have values which are of the type "quoted-string" as
defined in section 2.2 of the HTTP/1.1 specification [2]. A
consequence is that these values represent strings in the US-ASCII
character set. An unfortunate side effect of this is that digest
authentication is not capable of handling either user names or realm
names (see 2.1.1 below) which are not expressed in this character set.
2. Digest Access Authentication Scheme
2.1 Specification of Digest Headers
The Digest Access Authentication scheme is conceptually similar to
the Basic scheme. The formats of the modified WWW-Authenticate
header line and the Authorization header line are specified below,
using the extended BNF defined in the HTTP/1.1 specification, section
2.1. In addition, a new header, Authentication-info, is specified.
2.1.1 The WWW-Authenticate Response Header
If a server receives a request for an access-protected object, and an
acceptable Authorization header is not sent, the server responds with
a "401 Unauthorized" status code, and a WWW-Authenticate header,
which is defined as follows:
WWW-Authenticate = "WWW-Authenticate" ":" "Digest"
digest-challenge
digest-challenge = 1#( realm | [ domain ] | nonce |
[ digest-opaque ] |[ stale ] | [ algorithm ] )
realm = "realm" "=" realm-value
realm-value = quoted-string
domain = "domain" "=" <"> 1#URI <">
nonce = "nonce" "=" nonce-value
nonce-value = quoted-string
opaque = "opaque" "=" quoted-string
stale = "stale" "=" ( "true" | "false" )
algorithm = "algorithm" "=" ( "MD5" | token )
The meanings of the values of the parameters used above are as
follows:
realm
A string to be displayed to users so they know which username and
password to use. This string should contain at least the name of
the host performing the authentication and might additionally
indicate the collection of users who might have access. An example
might be "registeredusers@gotham.news.com." The realm is a
"quoted-string" as specified in section 2.2 of the HTTP/1.1
specification [2].
domain
A comma separated list of URIs, as specified for HTTP/1.0. The
intent is that the client could use this information to know the
set of URIs for which the same authentication information should be
sent. The URIs in this list may exist on different servers. If
this keyword is omitted or empty, the client should assume that the
domain consists of all URIs on the responding server.
nonce
A server-specified data string which may be uniquely generated each
time a 401 response is made. It is recommended that this string be
base64 or hexadecimal data. Specifically, since the string is
passed in the header lines as a quoted string, the double-quote
character is not allowed.
The contents of the nonce are implementation dependent. The
quality of the implementation depends on a good choice. A
recommended nonce would include
H(client-IP ":" time-stamp ":" private-key )
Where client-IP is the dotted quad IP address of the client making
the request, time-stamp is a server generated time value, private-
key is data known only to the server. With a nonce of this form a
server would normally recalculate the nonce after receiving the
client authentication header and reject the request if it did not
match the nonce from that header. In this way the server can limit
the reuse of a nonce to the IP address to which it was issued and
limit the time of the nonce's validity. Further discussion of the
rationale for nonce construction is in section 3.2 below.
An implementation might choose not to accept a previously used
nonce or a previously used digest to protect against a replay
attack. Or, an implementation might choose to use one-time nonces
or digests for POST or PUT requests and a time-stamp for GET
requests. For more details on the issues involved see section 3.
of this document.
The nonce is opaque to the client.
opaque
A string of data, specified by the server, which should returned by
the client unchanged. It is recommended that this string be base64
or hexadecimal data. This field is a "quoted-string" as specified
in section 2.2 of the HTTP/1.1 specification [2].
stale
A flag, indicating that the previous request from the client was
rejected because the nonce value was stale. If stale is TRUE (in
upper or lower case), the client may wish to simply retry the
request with a new encrypted response, without reprompting the user
for a new username and password. The server should only set stale
to true if it receives a request for which the nonce is invalid but
with a valid digest for that nonce (indicating the the client knows
the correct username/password).
algorithm
A string indicating the algorithm used to produce the digest or
checksum. If this not present the MD5 algorithm is assumed. In
this document the string obtained by applying this algorithm to the
data "data" will be denoted by H(data).
2.1.2 The Authorization Request Header
The client is expected to retry the request, passing an Authorization
header line, which is defined as follows.
Authorization = "Authorization" ":" "Digest" digest-response
digest-response = 1#( username | realm | nonce | digest-uri |
response | [ digest ] | [ algorithm ] |
opaque )
username = "username" "=" username-value
username-value = quoted-string
digest-uri = "uri" "=" digest-uri-value
digest-uri-value = request-uri ; As specified by HTTP/1.1
response = "response" "=" response-digest
digest = "digest" "=" entity-digest
response-digest = <"> 32*LHEX <">
entity-digest = <"> 32*LHEX <">
LHEX = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" |
"8" | "9" | "a" | "b" | "c" | "d" | "e" | "f"
The definitions of response-digest and entity-digest above indicate
the encoding for their values. The following ones show how the value
is computed:
response-digest =
<"> < H( H(A1) ":" nonce-value ":" H(A2) > <">
A1 = username-value ":" realm-value ":" password
password = < user's password >
A2 = Method ":" digest-uri-value
The "username-value" field is a "quoted-string" as specified in section
2.2 of the HTTP/1.1 specification [2]. "Method" is the HTTP request
method as specified in section 5.1 of [2]. The "request-uri" value is
the Request-URI from the request line as specified in section 5.1 of
[2]. This may be "*", an "absoluteURL" or an "abs_path" as specified
in section 5.1.2 of [2], but it MUST agree with the Request-URI, in
particular, it MUST be an "absoluteURL" if the Request-URI is an
"absoluteURL".
No white space is allowed in any of the strings to which the digest
function H() is applied with the exception of the entity-body (see below).
For example the string A1 must be of the form "user:realm:password" with
no white space on either side of the colons. Likewise, except for the
entity-body, the other strings digested by H() must not have white
space on either side of the colons which delimit their fields.
The authenticating server must assure that the document designated
by the "uri" parameter is the same as the document served. The
purpose of duplicating information from the request URL in this
field is to deal with the possibility that an intermediate proxy may
alter the client's request. This altered (but presumably semantically
equivalent) request would not result in the same digest as that
calculated by the client.
The optional "digest" field contains a digest of the entity body and
some of the associated entity headers. This digest can be useful in
both request and response transactions. In a request it can insure the
integrity of POST data or data being PUT to the server. In a response
it insures the integrity of the served document. The value of the
"digest" field is an <entity-digest> which is defined as follows.
entity-digest = <"> H(H(A1) ":" nonce-value ":" Method ":"
entity-info ":" H(entity-body)) <">
; format is <"> 32*LHEX <">
entity-info = H(
digest-uri-value ":"
media-type ":" ; Content-type, see section 3.7 of [2]
*DIGIT ":" ; Content length -- see 10.12 of [2]
content-coding ":" ; Content-encoding, see section 3.5 of [2]
last-modified ":" ; last modified date - see section 10.25 of [2]
expires ; expiration date; see section 10.19 of [2]
)
; format is <"> 32*LHEX <">
last-modified = rfc1123-date ; see section 3.2.1 of [2]
expires = rfc1123-date
The entity-info elements incorporate the values of the URI used to
request the entity as well as the associated entity headers
Content-type, Content-length, Content-encoding, Last-modified, and
Expires. These headers are all end-to-end headers (see section ??? of [2])
which must not be modified by proxy caches. The "entity-body" is as
specified by section 10.13 of [2] or RFC 1864.
Note that not all entities will have an associated URI or all of
these headers. For example, an entity which is the data of a
POST request will typically not have a digest-uri-value or
Last-modified or Expires headers. If an entity does not have a
digest-uri-value or a header corresponding to one of the entity-info
fields, then that field is left empty in the computation of
entity-info. All the colons specified above are present, however.
For example the value of the entity-info associated with POST data
which has content-type "text/plain", no content-encoding and a length
of 255 bytes would be H(:text/plain:255:::).
In the entity-info computation, except for the blank after the comma
in "rfc1123-date", there must be no white space between "words" and
"tspecials", and exactly one blank between "words" (see section 2.2
of [2]).
2.1.3 The Authentication-info Header
When authorization succeeds, the Server may optionally provide a
Authentication-info header indicating that the server wants to
communicate some information regarding the successful authentication
(such as an entity digest or a new nonce to be used for the next
transaction). It has two fields, digest and nextnonce. Both
are optional.
Authentication-info = "Authentication-info" ":"
1#( digest | nextnonce )
nextnonce = "nextnonce" "=" nonce-value
digest = "digest" "=" entity-digest
The optional digest allows the client to verify that the body
of the response has not been changed en-route. The server would
probably only send this when it has the document and can compute it.
The server would probably not bother generating this header for CGI
output. The value of the "digested-entity" is an <entity-digest> which
is computed as described above.
The value of the nextnonce parameter is the nonce the server wishes
the client to use for the next authentication response. Note that
either field is optional. In particular the server may send the
Authentication-info header with only the nextnonce field as a means of
implementing one-time nonces. If the nextnonce field is present the
client is strongly encouraged to use it for the next WWW-Authenticate
header. Failure of the client to do so may result in a request to
re-authenticate from the server with the "stale=TRUE."
2.2 Digest Operation
Upon receiving the Authorization information, the server may check
its validity by looking up its known password which corresponds to
the submitted username. Then, the server must perform the same MD5
operation performed by the client, and compare the result to the
given response-digest.
Note that the HTTP server does not actually need to know the user's
clear text password. As long as H(A1) is available to the server,
the validity of an Authorization header may be verified.
A client may remember the username, password and nonce values, so
that future requests within the specified <domain> may include the
Authorization line preemptively. The server may choose to accept the
old Authorization information, even though the nonce value included
might not be fresh. Alternatively, the server could return a 401
response with a new nonce value, causing the client to retry the
request. By specifying stale=TRUE with this response, the server
hints to the client that the request should be retried with the new
nonce, without reprompting the user for a new username and password.
The opaque data is useful for transporting state information around.
For example, a server could be responsible for authenticating content
which actual sits on another server. The first 401 response would
include a domain field which includes the URI on the second server,
and the opaque field for specifying state information. The client
will retry the request, at which time the server may respond with a
301/302 redirection, pointing to the URI on the second server. The
client will follow the redirection, and pass the same Authorization
line, including the <opaque> data which the second server may
require.
As with the basic scheme, proxies must be completely transparent in
the Digest access authentication scheme. That is, they must forward
the WWW-Authenticate, Authentication-info and Authorization headers
untouched. If a proxy wants to authenticate a client before a request
is forwarded to the server, it can be done using the Proxy-
Authenticate and Proxy-Authorization headers.
2.3 Security Protocol Negotiation
It is useful for a server to be able to know which security schemes a
client is capable of handling.
If this proposal is accepted as a required part of the HTTP/1.1
specification, then a server may assume Digest support when a client
identifies itself as HTTP/1.1 compliant.
It is possible that a server may want to require Digest as its
authentication method, even if the server does not know that the
client supports it. A client is encouraged to fail gracefully if the
server specifies any authentication scheme it cannot handle.
2.4 Example
The following example assumes that an access-protected document is
being requested from the server. The URI of the document is
"http://www.nowhere.org/dir/index.htm". Both client and server know
that the username for this document is "Mufasa", and the password is
"CircleOfLife".
The first time the client requests the document, no Authorization
header is sent, so the server responds with:
HTTP/1.1 401 Unauthorized
WWW-Authenticate: Digest realm="testrealm@host.com",
nonce="dcd98b7102dd2f0e8b11d0f600bfb0c093",
opaque="5ccc069c403ebaf9f0171e9517f40e41"
The client may prompt the user for the username and password, after
which it will respond with a new request, including the following
Authorization header:
Authorization: Digest username="Mufasa",
realm="testrealm@host.com",
nonce="dcd98b7102dd2f0e8b11d0f600bfb0c093",
uri="/dir/index.htm",
response="e966c932a9242554e42c8ee200cec7f6",
opaque="5ccc069c403ebaf9f0171e9517f40e41"
2.5 Proxy-Authentication and Proxy-Authorization
The digest authentication scheme may also be used for authenticating
users to proxies or proxies to end servers. Unlike the WWW-
Authenticate, and Authorization headers, the proxy versions, Proxy-
Authenticate and Proxy-Authorization, apply only to the current
connection and must not be passed upstream or downstream. The
transactions for proxy authentication are very similar to those
already described. Upon receiving a request which requires
authentication the proxy/server must issue the "HTTP/1.1 401
Unauthorized" header followed by a "Proxy-Authenticate" header of the
form
Proxy-Authentication = "Proxy-Authentication" ":" "Digest"
digest-challenge
where digest-challenge is as defined above in section 2.1. The
client/proxy must then re-issue the request with a Proxy-Authenticate
header of the form
Proxy-Authorization = "Proxy-Authorization" ":"
digest-response
where digest-response is as defined above in section 2.1. When
authorization succeeds, the Server may optionally provide a Proxy-
Authentication-info header of the form
Proxy-Authentication-info = "Proxy-Authentication-info" ":" nextnonce
where nextnonce has the same semantics as the nextnonce field in the
Authentication-info header described above in section 2.1.
Note that in principle a client could be asked to authenticate itself
to both a proxy and an end-server. It might receive an "HTTP/1.1 401
Unauthorized" header followed by both a WWW-Authenticate and a Proxy-
Authenticate header. However, it can never receive more than one
Proxy-Authenticate header since such headers are only for immediate
connections and must not be passed on by proxies. If the client
receives both headers is must respond with both the Authorization and
Proxy-Authorization headers as described above which will likely
involve different combinations of username, password, nonce, etc.
3. Security Considerations
Digest Authentication does not provide a strong authentication
mechanism. That is not its intent. It is intended solely to replace
a much weaker and even dangerous authentication mechanism: Basic
Authentication. An important design constraint is that the new
authentication scheme be free of patent and export restrictions.
Most needs for secure HTTP transactions cannot be met by Digest
Authentication. For those needs SSL or SHTTP are more appropriate
protocols. In particular digest authentication cannot be used for
any transaction requiring encrypted content. Nevertheless many
functions remain for which digest authentication is both useful and
appropriate.
3.1 Comparison with Basic Authentication
Both Digest and Basic Authentication are very much on the weak end of
the security strength spectrum. But a comparison between the two
points out the utility, even necessity, of replacing Basic by Digest.
The greatest threat to the type of transactions for which these
protocols are used is network snooping. This kind of transaction
might involve, for example, online access to a database whose use is
restricted to paying subscribers. With Basic authentication an
eavesdropper can obtain the password of the user. This not only
permits him to access anything in the data base, but often worse,
will permit access to anything else the user protects with the same
password.
By contrast, with Digest Authentication the eavesdropper only gets
access to the transaction in question and not to the user's password.
The information gained by the eavesdropper would permit a replay
attack, but only with a request for the same document and even that
might be difficult.
3.2 Replay Attacks
A replay attack against digest authentication would usually be
pointless for a simple GET request since an eavesdropper would
already have seen the only document he could obtain with a replay.
This is because the URI of the requested document is digested in the
client response and the server will only deliver that document. By
contrast under Basic Authentication once the eavesdropper has the
user's password any document protected by that password is open to
him. A GET request containing form data could only be "replayed"
with the identical data. However, this could be problematic if it
caused a CGI script to take some action on the server.
Thus, for some purposes, it is necessary to protect against replay
attacks. A good digest implementation can do this in various ways.
The server created "nonce" value is implementation dependent, but if
it contains a digest of the client IP, a timestamp, and a private
server key (as recommended above) then a replay attack is not simple.
An attacker must convince the server that the request is coming from
a false IP address and must cause the server to deliver the document
to an IP address different from the address to which it believes it
is sending the document. An attack can only succeed in the period
before the timestamp expires. Digesting the client IP and timestamp
in the nonce permits an implementation which does not maintain state
between transactions.
For applications where no possibility of replay attack can be
tolerated the server can use one-time response digests which will not
be honored for a second use. This requires the overhead of the
server remembering which digests have been used until the nonce
timestamp (and hence the digest built with it) has expired, but it
effectively protects against replay attacks. Instead of maintaining a
list of the values of used digests, a server would hash these values
and require re-authentication whenever a hash collision occurs.
An implementation must give special attention to the possibility of
replay attacks with POST and PUT requests. A successful replay attack
could result in counterfeit form data or a counterfeit version of a
PUT file. The use of one-time digests or one-time nonces is
recommended. It is also recommended that the optional <digest> be
implemented for use with POST or PUT requests to assure the integrity
of the posted data. Alternatively, a server may choose to allow
digest authentication only with GET requests. Responsible server
implementors will document the risks described here as they pertain to
a given implementation.
3.3 Man in the Middle
Both Basic and Digest authentication are vulnerable to "man in the
middle" attacks, for example, from a hostile or compromised proxy.
Clearly, this would present all the problems of eavesdropping. But
it could also offer some additional threats. In particular, even
with digest authentication, a hostile proxy might spoof the client
into making a request the attacker wanted rather than one the client
wanted. Of course, this is still much harder than a comparable
attack against Basic Authentication.
There are several attacks on the "disgest" field in the
Authentication-info header. In particular, the attacker can alter any
of the entity-headers not incorporated in the computation of the digest,
The attacker can alter most of the request headers in the client's
request, and can alter any response header in the origin-server's reply,
except those headers whose values are incorporated into the "digest"
field.
Alteration of Accept* or User-Agent request headers can only result
in a denial of service attack that returns content in an unacceptable
media type or language. Alternation of cache control headers also can
only result in denial of service. Alteration of Host will be detected,
if the full URL is in the response-digest. Alteration of Referer or
From is not important, as these are only hints.
3.4 Spoofing by Counterfeit Servers
Basic Authentication is vulnerable to spoofing by counterfeit
servers. If a user can be led to believe that she is connecting to a
host containing information protected by a password she knows when in
fact she is connecting to a hostile server then the hostile server
can request a password, store it away for later use, and feign an
error. This type of attack is more difficult with Digest
Authentication.
3.5 Storing passwords
Digest authentication requires that the authenticating agent (usually
the server) store some data derived from the user's name and password
in a "password file" associated with a given realm. Normally this
might contain pairs consisting of username and H(A1), where H(A1) is
the digested value of the username, realm, and password as described
above.
The security implications of this are that if this password file is
compromised then an attacker gains immediate access to documents on
the server using this realm. Unlike, say a standard UNIX password
file, this information need not be decrypted in order to access
documents in the server realm associated with this file. On the
other hand, decryption, or more likely a brute force attack, would be
necessary to obtain the user's password. This is the reason that the
realm is part of the digested data stored in the password file. It
means that if one digest authentication password file is compromised,
it does not automatically compromise others with the same username
and password (though it does expose them to brute force attack).
There are two important security consequences of this. First the
password file must be protected as if it contained unencrypted
passwords, because for the purpose of accessing documents in its
realm, it effectively does.
A second consequence of this is that the realm string should be
unique among all realms which any single user is likely to use. In
particular a realm string should include the name of the host doing
the authentication. The inability of the client to authenticate the
server is a weakness of Digest Authentication.
3.6 Summary
By modern cryptographic standards Digest Authentication is weak. But
for a large range of purposes it is valuable as a replacement for
Basic Authentication. It remedies many, but not all, weaknesses of
Basic Authentication. Its strength may vary depending on the
implementation. In particular the structure of the nonce (which is
dependent on the server implementation) may affect the ease of
mounting a replay attack. A range of server options is appropriate
since, for example, some implementations may be willing to accept the
server overhead of one-time nonces or digests to eliminate the
possibility of replay while others may satisfied with a nonce like
the one recommended above restricted to a single IP address and with
a limited lifetime.
The bottom line is that *any* compliant implementation will be
relatively weak by cryptographic standards, but *any* compliant
implementation will be far superior to Basic Authentication.
4. Acknowledgments
In addition to the authors, valuable discussion instrumental in
creating this document have come from Peter J Churchyard, Ned Freed,
and David Kristol.
5. References
[1] T. Berners-Lee, R. T. Fielding, H. Frystyk Nielsen.
"Hypertext Transfer Protocol -- HTTP/1.0"
Internet-Draft (work in progress), UC Irvine,
<URL:http://ds.internic.net/internet-drafts/
draft-ietf-http-v10-spec-00.txt>, March 1995.
[2] T. Berners-Lee, R. T. Fielding, H. Frystyk Nielsen...
"Hypertext Transfer Protocol -- HTTP/1.1"
TBS
[3] RFC 1321. R.Rivest, "The MD5 Message-Digest Algorithm",
<URL:http://ds.internic.net/rfc/rfc1321.txt>,
April 1992.
6. Authors Addresses
John Franks
john@math.nwu.edu
Professor of Mathematics
Department of Mathematics
Northwestern University
Evanston, IL 60208-2730, USA
Phillip M. Hallam-Baker
hallam@w3.org
European Union Fellow
CERN
Geneva
Switzerland
Jeffery L. Hostetler
jeff@spyglass.com
Senior Software Engineer
Spyglass, Inc.
3200 Farber Drive
Champaign, IL 61821, USA
Paul J. Leach
paulle@microsoft.com
Microsoft Corporation
1 Microsoft Way
Redmond, WA 98052, USA
Ari Luotonen
luotonen@netscape.com
Member of Technical Staff
Netscape Communications Corporation
501 East Middlefield Road
Mountain View, CA 94043, USA
Eric W. Sink
eric@spyglass.com
Senior Software Engineer
Spyglass, Inc.
3200 Farber Drive
Champaign, IL 61821, USA
Lawrence C. Stewart
stewart@OpenMarket.com
Open Market, Inc.
215 First Street
Cambridge, MA 02142, USA